Call

 

On this page in the next paragraph you will discover a lot of worthwhile points around How to Troubleshoot and Repair an Electric Water Heater.

Lots of contemporary houses utilize an electric water heater for their heating unit, because of its benefit and convenience of use. However, much like any other electrical appliances, troubles might arise with its use, all of a sudden. It can be really irritating to get up to a cold shower as opposed to a warm one or having your bath with water that isn't hot sufficient or even too hot. Whatever the situation may be, water heater issues can be quite stressful. Fortunately, we've made a checklist of feasible services to your hot water heater concerns. There are a number of variables that could trigger a lot of these problems, maybe a concern with the power supply, the electric heating element, or the thermostat. Prior to doing anything, ensure you turn off the primary power supply for security. Whatever the issue is, getting it fixed must not posture excessive of a concern if you adhere to these actions:

 

Call A Professional:

If after replacing all faulty parts as well as resetting your temperature level, the hot water heater still isn't working, you might require to speak to a specialist plumber for an expert opinion. The trouble with your heating system could be that the hot and cold faucets have actually been switched over or it may be undersized for the amount of warm water needed in your home. Whatever the instance might be, an expert plumber would help fix the trouble.

 

Check Your Power Supply:

As fundamental as this might appear, it is extremely required. Without ample power, your hot water heater will not work. So the first thing to do when your water unexpectedly stops working is to verify that it isn't a power issue. Inspect if the fuse is blown out or the circuit breaker tripped. If the breaker is the issue, just transform it off and on again. Change any damaged or worn-out fuse. Examine the home appliance with power after these modifications to see if it's now functioning.

 

Check Your Thermostat:

If your water heater still isn't functioning or the water appearing isn't hot enough, you may need to check the temperature setups on your top thermostat. Make certain the breaker is turned off before doing anything. Open up the accessibility panel as well as press the red switch for temperature reset over the thermostat. This need to help heat the water. Turn the breaker back on as well as examine if the trouble has been solved.

 

Inspect the Heating Element in the Hot Water Heater:

If it's not a power problem, then attempt having a look at your burner if it is still functioning. Examine each of your heating elements to make sure the issue isn't with any of them. If any one of them is defective, replace that component and after that examine whether the hot water is back on.

 

Final thought

Water heater issues are not always major. Most of them are because of small concerns like a blown fuse or worn-out burner. Replacing the defective parts ought to suffice. Nevertheless, if you are still not able to solve the problem, give a call to your local plumber to find to get it repaired.

 

Common Reasons Why Your Hot Water Heater Isn’t Working

 

Water Gets Too Hot

 

Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.

FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.

 

Water Doesn’t Get Hot

 

This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).

FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.

 

Leaking Water Heater

 

A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.

FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.

 

Noisy Water Heater

 

Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.

FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.

 

Pilot Light Keeps Going Out

 

Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.

FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.

 

Water Smells Bad

 

The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.

FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.

 

Water Looks Brown Or Rusted

 

The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)

FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.

https://www.huskyair.com/blog/hot-water-heater-isnt-working/

 

Do you enjoy reading up on What Would Cause My Electric Water Heater to Stop Working?? Make a remark below. We will be glad to listen to your thinking about this blog. We are looking forward that you visit us again in the near future. Sharing is good. Who knows, you may very well be helping someone out. I praise you for your time. Come back soon.

Search no more; expert plumbers.